Pi-Star

• Log in to your Pi-Star dashboard and perform an update.
• After the update, click on Configuration.
• In DMR Master select "FreeDMR New Zealand".
• If you run more than one hotspot, select a unique ESSID for this one.
• Ensure you're using Colour Code 1.
• Add static groups using the Options Line (see below)
• Click save.

Options Line

You can use the Options Calcultor to generate a Pi-Star Options line.

Example:

        Options=TS1=91,530,5302;TS2=969;DIAL=0;TIMER=15;VOICE=0;SINGLE=0;LANG=0;
        

• TS1/TS2 - TGs - Comma separated list of static talk groups.
• DIAL - TG - Set default Enhanced Talk Groups (Dial-a-TG) TG9 Slot 2 TG.
• TIMER - Minutes - Number of minutes dynamic talk groups are active for after keyup.
• SINGLE - 0|1 - Single dynamic talk group mode.
• VOICE - 0|1 - Radios will RX from the local network "This is CALL-SIGN FreeDMR".
• LANG - 0|en_GB - Language for Voice Announcements.

DMRGateway

        [DMR Network 1]
        Enabled=1
	Name=FreeDMR_New_Zealand
	Address=freedmrnz.dvnz.nz
        Port=62031
        PCRewrite=2,80,2,80,4977
        PCRewrite=2,530,2,530,1
        PCRewrite=2,5300,2,5300,100
        PCRewrite=2,235000,2,235000,1000
        PCRewrite=2,236000,2,236000,764000
        PassAllTG=1
        PassAllTG=2
        Password=passw0rd
        Debug=0
        Options=
        Location=0